Kramer Introduces FC-332 3G HD-SDI to HDMI Format Converter with Dual Outputs

December 28-2009

Kramer Introduces  FC-332 3G HD-SDI to HDMI Format Converter with Dual Outputs
Kramer Electronics has released the FC-332 3G HD-SDI to HDMI format converter with dual outputs. The unit converts an incoming SDI video and audio signal to two HDMI output signals with the same resolution and frame rate.

The FC-332 provides tremendous value as it is currently the only SDI to HDMI format converter with dual outputs available.  Prior to the introduction of the FC-332, users would require both an SDI to HDMI format converter and an HDMI DA if an application required the converted signal be sent to two HDMI destinations.

The FC-332 accepts a multi-standard SDI signal, either SDI (SMPTE 259M and SMPTE 344M), HD-SDI (SMPTE 292M) or 3G HD-SDI (SMPTE 424M) on a BNC connector and converts the video and audio signal into two HDMI signal outputs via HDMI connectors.  It also has a looping input on a BNC connector so the original SDI signal can be simultaneously sent to a second destination in its original format.

The FC-332 is HDTV compatible and comes in a compact Kramer DigiTOOLS® enclosure with active input and output LED indicators.  The format converter also has an SDI audio group selection rotary switch for selecting an SDI input stereo channel from among the eight pairs of audio embedded in the signal (0 to 7).

The FC-332 3G HD-SDI to HDMI format converter is available through authorized Kramer Electronics resellers worldwide.  Complete Kramer product information may be found at www.kramerelectronics.com