Media Wall-Plates

Media switching and room control integrated wall-plates

Found Products

VS-4FW

4−Port FireWire® Repeater/HUB

The VS−4FW is a high−performance bidirectional hub/repeater for 6−pin FireWire® (IEEE 1394) signals. It increases the number of ports available and/or extend the distance of FireWire® cable runs.

See Product Page

Inputs:

    4 FW (6-pin)

Outputs:

    N/A

VS-8FW

8−Port FireWire® Repeater/HUB

The VS−8FW is a high−performance bidirectional hub/repeater for 6−pin FireWire® (IEEE 1394) signals. It increases the number of ports available and/or extend the distance of FireWire® cable runs.

See Product Page

Inputs:

    8 FW (6-pin)

Outputs:

    N/A

WP-500

  • VGA/UXGA - 15-pin HD
  • Microphone - 3.5/6.5mm
  • Ethernet - RJ-45

Active Wall Plate Solution for Simple Room Control & Signal Switching

The WP−500 is a switcher for computer graphics video, composite video, stereo audio and microphone signals. It routes one of three AV input sources to a display and controls the display by IR or RS−232 commands.

See Product Page

Inputs:

    1 CV
    2 VGA
    2 Knob
    4 Buttons

Outputs:

    1 CV
    1 VGA
    1 RS-232
    1 IR Emitters

RC-108

8−Button Presentation Controller

The RC−108 is a presentation controller for twisted pair transmitters. The unit can switch up to 8 sources that are interconnected in series through looping inputs to a single twisted pair receiver.

See Product Page

Inputs:

    8 Buttons
    1 RS-232

Outputs:

    1 K-NET

RC-160

  • Ethernet - RJ-45

16x16 Master Remote Control Panel

The RC−160 is a remote control panel for Kramer switchers with RS−232 and RS−485 control interfaces. It can control any Kramer switcher up to 16x16 that utilizes Kramer’s Protocol 2000 RS−232 command set.

See Product Page

Inputs:

    32 Buttons

Outputs:

    1 Ethernet
    2 RS-232
    1 RS-485

RC-160L

  • Ethernet - RJ-45

16x16 Master Remote Control Panel

TheRC−160L is a remote control panel for Kramer switchers with RS−232 and RS−485control interfaces. It can control any Kramer switcherthat utilizes Kramer’s Protocol 2000 RS−232 command set up to 16x16 in size.</p>

See Product Page

Inputs:

    32 Buttons

Outputs:

    2 Ethernet
    2 RS-232
    2 RS-485

RC-80

  • Ethernet - RJ-45

8x8 Master Remote Control Panel

The RC−80 is a programmable remote control panel for Kramer switchers with RS−232 and RS−485 control interfaces. It controls any Kramer switcher up to 8x8 in size that uses Kramer’s Protocol 2000 RS−232 command set.

See Product Page

Inputs:

    16 Buttons

Outputs:

    1 Ethernet
    2 RS-232
    1 RS-485

RC-8000

Master Remote Control Panel

The RC−8000 is a master remote control unit for the Kramer series 88 matrix switchers (VS−88A, VS−88V, SD−7588A and the VS−7588V). It can control up to 8 switchers and an unlimited number of control panels.

See Product Page

Inputs:

Outputs:

    1 RS-485

WP-501

  • VGA/UXGA - 15-pin HD
  • Microphone - 3.5/6.5mm
  • Ethernet - RJ-45

Active Wall Plate Solution for Simple Room Control & Signal Switching

See Product Page

Inputs:

    1 CV
    2 VGA
    2 Knob
    4 Buttons

Outputs:

    1 CV
    1 VGA
    1 RS-232
    1 IR Emitters
    2 Relay