The VA-2H can store and recall a default EDID setting in non-volatile memory allowing convenient and accurate connection to any HDMI source. EDID (Extended Display Identification Data) is 256 bytes of data that a display provides to the graphics card of a connected computer source. The EDID describes the display’s capabilities so that the source can output the best possible signal for that display. The source and the display exchange this information over the Display Data Channel 2 (DDC2) using pins 15 and 16 of a standard HDMI connector.
The VA-2H ensures that if a display is turned off, temporarily disconnected or is out of communication with the source, the source continues to output the best possible signal resolution. The EDID emulation makes the source think that the display is still directly connected even when the EDID information is unavailable directly from the monitor.
Many systems including matrix switchers, and distribution amplifiers, for example, are unable to pass EDID information from the monitor to the source. In these instances the VA-2H captures the EDID information from the display and provides the EDID communication to the source. Note that an HDMI cable must be used that passes all 19 pins between the source and VA-2H. This allows the source to output the best possible signal for that display device.
The VA-2H is HDMI 1.3, HDCP 1.1, and DVI 1.0 compliant. This unit also comes equipped with Windows- based application software that enables the user to edit and save EDID settings, and create custom EDID timings.
The VA-2H comes housed in a compact DigiTools® enclosure, with a 12V power supply. The VA-2H is currently in stock and available from Kramer Electronics sales companies around the world.